Part #

81280

Description

MacPherson Strut Camber Adjuster

Vehicle Applications

Vehicles with 16mm OE strut to spindle mounting bolts
See specific applications for full listing.

Adjustment Range

up to ± 2°

Installation Time

.4 hours per side

Quantity Required

1 kit per wheel

Downloadable
Instructions

M.S.R.P.

$45.06
 
Replace both strut to spindle mounting bolts to achieve up to ±2°.
 
Note:  For positive camber adjustment, rotate the upper Fastcam® arrow towards the tire and the lower Fastcam® arrow towards the engine.  For negative camber adjustment, rotate the upper Fastcam® arrow towards the engine and the lower Fastcam® arrow towards the tire.
 
CAUTION:  Observe proper safety and repair procedures for installation of all chassis parts.  Some chassis parts require specialized tools and experience and therefore MUST be installed by a qualified technician otherwise an unsafe vehicle and / or personal injury could result.
 
NOTE:  These parts are intended for use in vehicles with abnormal alignment and are designed to replace the non-adjustable factory equipment.  These parts are not designed for installation on vehicles with suspension and/or steering systems modified for racing, competition or any other non-standard purpose.