24

Click Graphic to Enlarge
Loosen upper control arm mounting bolts.
slide arm in or out adjust camber and caster.

25

Click Graphic to Enlarge
To adjust camber rotate eccentric bolt at front inner mount.
To adjust caster rotate ball pin at reat inner mount.

26

Click Graphic to Enlarge
Loosen strut mounting bolts.
Move the strut in or out to adjust camber or
front or rear to adjust caster.

27

Click Graphic to Enlarge
Rotate eccentric cam bolts located on the inner lower control arm
mount to adjust camber & caster.

28

Click Graphic to Enlarge
Rotate the eccentric cams on the control arm to adjust camber/caster.

29

Click Graphic to Enlarge
Eccentric located on the lower control arm at the inner mounts.
To adjust camber rotate both eccentrics in the same direction.
Rotate the eccentrics in the opposite direction to adjust caster.

  30

Click Graphic to Enlarge
Rotate ball joint to increase or decrease camber 1°.
Add or remove washers to adjust caster.

31

Click Graphic to Enlarge
Remove the strut mounting nuts.
Push the mount down and rotate to adjust camber and caster up to 1/2°.

32

Click Graphic to Enlarge
Rotate eccentric to adjust camber
Rotate eccentric to adjust caster

33

Click Graphic to Enlarge
Loosen mounting bolts and rotate eccentrics to adjust camber/caster.

34

Click Graphic to Enlarge
Loosen control arm mounting bolts and install special tool at
position 1 to adjust camber or position 2 for caster.

35

Click Graphic to Enlarge
Rotate eccentric to adjust camber
Rotate eccentric to adjust caster